AddingtotheFixtureLibrary Patchingyourlights
3. Press the touchscreen dial button to enter details for the first channels of the
fixture. Stage CL recognises these features: Intensity, Red, Blue, Green,
Amber, White, Cool White, Warm White, Colour Temperature, Strobe,
Zoom, Cyan, Magenta, Yellow, Custom 1-4’. There’s also an option to ‘Enter
your own’ feature name (for example Pan and Tilt). You can add Fine
channels after you have set a standard feature such as Intensity, Red, Green,
Blue etc.
4. Touch in the other fields or hold the shift button and use the dial to scroll
across to enter values for this channel.
This field… is used to…
Dial
-
Set the dial (encoder) used to control the feature.
Assigns the feature to the Hue & Saturation controls.
This must be used for R,G,B,A,W
Assigns the feature to Shift + Saturation. This is the
default for Strobe.
Assigns the feature to Shift + Hue. This is the default
for Zoom.
Assigns the feature to the Hue dial. This option can
only be used on fixtures with no color (RGBAW)
features.
Assigns the feature to the Saturation dial. This option
can only be used on fixtures with no color (RGBAW)
features.
Dflt (Default) Sets the default value for the channel (0 – 255)
Min (Minimum) Sets the minimum value for the channel (0 – 255)
Max (Maximum) Sets the maximum value for the channel (0 – 255)
5. Repeat these steps for the other fixture channels.
4‐6 StageCLUserGuide,Version1.3
To Next Page
Loading...
