COMPLEX RADIO CONTROL SYSTEM
4.3.1. Manual (Assist Off ):
Airplanes
For each flight mode, you can set the default gain (this multiplies
the proportional, integral and derivative coefficients in all axes),
and you can specify whether you want to use gain tuning via special
channels (see „Configuration -> Channel Assignment ->
Additional Channels Assignment”).
In intelligent mode, the receiver will stabilise the model horizon (at
the last known throttle level). On the other hand, when selecting
"Assist Off", all engines will be stopped.
4.3. Description of flight modes
In the REX Assist receiver, you can switch between several flight
modes, with the 3 default ones being preset.
Determine the fail-safe mode:
The basic airplane mode where the
stabilisation function is completely
deactivated and the pilot takes over
the manual control.
Depending on your preferences, choose which flight modes to use
during flight - a total of 5 are available, switching between three is
available (see the Description of flight modessection).
4.3.2. Training: Airplanes
This mode is used by the pilot to get accustomed to the model's
behavior, and is also useful for beginners. Basically the stabilisation
4.2.2. Choice of flight modes
EN
25
To Next Page
Loading...
