JETI model duplex REX 12A Series - Introduction

COMPLEX RADIO CONTROL SYSTEM
The REX A receivers enhance the REX series of receivers and extend
for airplane models and multicopters. This stabilization works in all
three axes of the model and facilitates flying in windy or otherwise
challenging conditions. Aerobatic maneuvers will be more
accurate and smoother. With the help of several flight modes,
which are also suitable for beginner pilots, flying practice will be
really easy.
The REX A receivers are compatible with all existing 2.4GHz Duplex
You can set them directly via DC/DS transmitters, alternatively you
can use the USBa adapter and JETI Studio software (free download
Tx modules and DC/DS transmitters.
it with the intelligent flight stabilization feature, which is designed
(e.g., receiver quality, inertial unit status and G-force level). They
also process telemetry from external sensors compatible with
Duplex EX or EX Bus
at www.jetimodel.com). The receivers provide internal telemetry
EN
1
REX receivers with function ASSIST
1 Introduction
English