COMPLEX RADIO CONTROL SYSTEM
Up to 3 additional Duplex sensors can
be connected to the receiver. For this
purpose you can use the ports marked
Ext, E1 and E2 (the E1 and E2 have to be
first switched to the "telemetry inputs"
mode).
In the receiver menu (or through the
JETI Studio program) you can view the
current values, the minimum and
m a x i mu m va l ue s re a ch e d. T he
maximum measured values can be
reset in the "Telemetry Min/Max" menu. The newly measured max
and min values will continue to be displayed until the manual reset
is activated.
By default, the receiver provides
operational telemetry data such as
battery voltage and signal strength.
With integrated inertial sensors, it can
al so p ro vi de i t s o ri en ta ti o n i n
individual axes (roll, pitch and yaw) or
total G-force.
EN
47
8 Real time telemetry
To Next Page
Loading...
