COMPLEX RADIO CONTROL SYSTEM
11 Activation of extension functions
All receivers of the REX Assist series have an integrated vario and
altimeter, including program support and telemetry data of these
modules. These software modules are not active by default. They
can be activated at any time after their purchase according to the
following procedure:
11.1. Registration and purchase of the module
1. check if your receiver has the latest firmware version. If not,
update it using a USB adapter and JETI Studio
2. on the website shop.jetimodel.cz register and log in to system
3. register the receiver as a new device. Select the correct type of
receiver in the "Device registration without serial number" menu.
Its "Registration code" can be found in the receiver menu in the
"Info" item.
53
EN
To Next Page
Loading...
