150 IFC-3030 Programming Manual — P/N 52025:C 08/05/2005
N–P Index
Local mode 47
Silenceable 46
Switch inhibit 46
Walk test 46
Zone map 46
Extended label 44
FlashScan Code label 44
Label 44
Module Type (Control/Monitor) 44
Monitor 45
Alarm verification 45
Local control 45
Zone map 45
Type Codes 44
Monitor Module, see Module, SLC or Panel Cir-
cuit
Multiple Event List
15
Multiple Events List screen
order of events
21
N
NAC (Notification Appliance Circuit) 144
Navigating Menu and Programming Screens 11
NBG-12LRA 90, 100, 101, 102, 104
Network Parameters 19
Channel threshold 19
Node
Label
19
Number, range 19
Standalone 19
To view 19
Wiring style 19
NFPA Standards for Releasing Applications 90
Node label 19
Node number 19
For standalone panel 19
Range 19
To view 19
Non-fire activations
Event logging
36
Non-latching 144
Note
120 seconds is the maximum delay af-
ter...(NYC timer)
94
A module with a releasing Type ID cannot
be forced off.
77
A printout of all the messages.... (Custom
Action messages)
35
A releasing circuit with this Type Code re-
quires...(REL END BELL)
105
A setting of NO (disable) will disable key-
switch operation.
21
A ULC Release circuit with this Type Code
requires...(REL CKT ULC)
106
All events except troubles are annunciated
during programming...
17
An AHJ timer does not comply with UL
Standard 864.
96
An NYC timer does not comply with UL
Standard 864.
94
Clearing all programs is not necessary
when...(VeriFire)
18
Deleting points that are active or in trou-
ble...
57
Do not include ZF8 in the zone map of Pan-
el Circuits used for....(releasing,
zone coding)
114
If the point is not installed...(saving entries)
44
No program menus will display if a user
password...(Alter status level)
17
The IZM-8RK module does not participate
in Walk Test...
50
The panel setting LCM LOCAL MODE
must be set to Yes...
40, 45
The second shot switch can only be
used...(MAN REL DELAY)
104
This soft key will not appear for modules
with Type ID...(silence option)
50
This value may not exceed 30 seconds for
ULC...
24
This value may not exceed 30 seconds for
ULC....
24
This value must be 20 minutes for ULC...
25
To change the language of the remote dis-
play
32
When changing from an 80-column or 80-
column supervised...
30
When the ACCEPT soft key is pressed to
save an equation...
53
NYC Abort Switch 94
O
Obscuration 144
Occupancy Schedule 31, 42
Holidays 36
Output activations
Event logging
36
Output circuit 144
Overwrite (logic equation screen) 53
P
Panel Circuit 144
See Module, Panel Circuit
See Point Program
Panel circuit modules are not suitable for...
99
Panel programming, see Programming, Panel set-
tings
Panel settings
21
AC Fail Delay 24
To Next Page
Loading...
Need help?
General
