10.3 CONTROL UNIT(NDC-1486)
yy
yyyy
yyyy
10-3
10
10.3 CONTROL UNIT(NDC-1486)
(1) Mounting Table mounting
(2) Video Output RGB, H-sync and V-sync (SXGA)
(3) Range Scale 0.15, 0.3, 0.5, 0.8, 1.2, 1.6, 2, 4, 8, 16 and 32km
(4) Range Ring 0.05, 0.1, 0.1, 0.2, 0.2, 0.4, 0.4, 1, 2, 4 and 8km
(5) Variable range marker Digital read-out on the screen (4 characters) 2 kinds of VRM
(6) EBL Digital read-out on the screen (4 characters) 2 kinds of EBL
(7) Cursor Range, Bearing, and Lat./Lon’
(8) Dimension Processing Keyboard
Height: approx. 170mm 45mm
Width: approx. 360mm 290mm
Depth: approx. 340mm 123mm
(9) Mass Processing Keyboard
approx. 6.9kg 1.0kg
(10) Tune mode Auto/manual mode
(11) STC only manual mode
(12) FTC only manual mode
(13) IR 3 kinds of IR mode
(14) Bearing scale 360qscale graduate at intervals of 1q
(15) Ship’s heading marker Electric flash line suppressible while pushing key
Ship’s stern marker can be displayed.
(16) P-Line 2 Parallel line
(17) Off center 3steps +60%,40%,20% of effective radius.
(18) Trails Relative trails / True trails
Trails length: OFF//2 scans/15/30sec/1/2/3/4/5/6min and continuation.
Any time possible to select the said article.
(19) Pulse length short/long ( 2, 4, 8km)
(20) Expansion OFF/FAIR/STRONG
(21) display color Radar echo: 16 level (yellow, green, amber, white)
Background (PPI): black, blue, dark gray
Background (outside of PPI): black, gray, dark gray, bright blue
Trails: 16 level (yellow, amber, white, bright blue, green)
Character/Dial: green, amber, white, yellow,
VRM1/VRM2: cyan, green
Own ship make/ other ship make: cyan, gray, magenta, green, white
To Next Page
Loading...
Need help?
General
