JRC JMA-610 Series User Manual

3.3 PREPARATION
y
yy
3-7
3
3.3 PREPARATION
3.3.1 Adjust Display Brilliance [BRILL]
Procedures 1 Press [BRILL] key or put the cursor on BRILL .
2 Set the brilliance value with the [JOG DIAL] or [TRACKBALL] to obtain
the best-to-see display with optimum brilliance and [ENTER] key.
In consideration of the ambient brightness, adjust display brilliance that is high enough to
easily observe the radar display but does not glare.
3.3.2 Adjust Operation Panel Brilliance [PANEL]
Adjust brilliance of the operation panel according to the ambient lighting condition.
Procedures 1 Press [PANEL] key.
In consideration of the ambient brightness, adjust panel brilliance that is high enough to
read the characters on the operation panel but does not glare.
The [PANEL] key lamp lights up irrespective of panel brilliance adjustment.
3.3.3 Switch Day/Night Mode [DAY/NIGHT]
Several combinations of the display color and brilliance according to the ambient lighting conditions are
provided. The display color setting is easily changed.
Procedures 1 Press [DAY/NIGHT] key.
The Day / Night modes are switched as follows.
The current mode is indicated at the upper right of the screen.
The brilliance level and the display color in accordance with the selected mode are saved.

JRC JMA-610 Series Specifications

General

Brand	JRC
Model	JMA-610 Series
Category	Radar
Language	English