3.6 DISPLAY USER MAP
y
yy
3-33
3
3.6.4 Set User Map Display (Mark Display Setting)
The user map can be individually displayed (on) or hidden (off).
Setting by type : Setting can be made by mark font and line pattern.
Setting by color : Setting can be made by color of mark or line.
The mark font display size can be selected.
Normal : The mark is displayed in normal size.
Small : The mark is displayed in a size smaller than usual.
Setting display by type
Procedures 1 Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 4.NAV Information and press [ENTER] key.
Select 4.Mark Display Setting and press [ENTER] key.
2 Select 1.Display Mark Type and press [ENTER] key.
3 Set about each mark font / line pattern and press [ENTER].
On : Displayed.
Off : Not Displayed.
About setting of All ,
Off : All types are not displayed even if all other settings are “On”.
On : All types are displayed even if all other settings are “Off”.
Individual : Setting by type is activated.
4 Press [ MENU] key.
Menu will be closed.
To Next Page
Loading...
