JRC JMA-610 Series User Manual

3-24
Paint Ship’s Mark
Procedures 1 Press [ MENU] key .
Main menu will appear.
2 Put the cursor on 6.OWN MARK and press [ENTER] key.
3 Put the cursor on 1.Filled and press [ENTER] key.
If On is selected, all ship’s mark will be painted.
4 Press [ MENU] key.
Menu will be closed.
Change the priority of Echo and Ship’s Mark
Procedures 1 Press [ MENU] key .
MAIN MENU will appear.
2 Put the cursor on 6.OWN MARK and press [ENTER] key.
3 Put the cursor on 2.RADAR Targets on Top and press [ENTER] key.
If On is selected, RADAR targets will be displayed over all ship’s mark.
4 Press [ MENU] key.
Menu will be closed.

JRC JMA-610 Series Specifications

General

Brand	JRC
Model	JMA-610 Series
Category	Radar
Language	English