JRC JMA-610 Series User Manual

3-44
[II] Discarding navigation data (Unload ).
Procedures 1 Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 4.NAV Information

and press [ENTER] key.
Select 5.File Operations

and press [ENTER] key.
2 Select 4.Unload and press [ENTER] key.
Confirmation Window will appear.
3 Select 1.Yes and press [ENTER] key.
The saved navigation data will be discarded.
4 Press [ MENU] key.
Menu will be closed.
[III] Saving navigation data (Save ).
Navigation data can be saved when navigation equipment is connected, or the own ship
position on the user map is entered in the manual mode.
Procedures 1 Insert a flash memory card into the card slot.
In the case of saving data to internal memory, a card is not necessary.
2 Press [MENU] key.
Select 8.Next and press [ENTER] key.
Select 4.NAV Information and press [ENTER] key.
Select 5.File Operations and press [ENTER] key.
3 Select 1.Select Card Slot and press [ENTER] key.
4 Select the slot number which you inserted a flash memory card or
3.Internal and press [ENTER] key.
5 Select 5.Save and press [ENTER] key.
The Input File Name menu will appear.
6 Enter the file name to be saved.
Up to 10 characters can be entered.
After the data has been entered, Confirmation Window will appear.
7 Press [ MENU] key.
Menu will be closed.

JRC JMA-610 Series Specifications

General

Brand	JRC
Model	JMA-610 Series
Category	Radar
Language	English