To Next Page

To Previous Page

3-46

[V] Displaying saved navigation data (File Mark Display)

Procedures 1 Insert a flash memory card into the card slot.

In the case of display the data of internal memory, a card is not necessary.

2 Press [MENU] key.

Select 8.Next and press [ENTER] key.

Select 4.NAV Information and press [ENTER] key.

Select 5.File Operations and press [ENTER] key.

3 Select 1.Select Card Slot and press [ENTER] key.

4 Select the slot number which you inserted a flash memory card or

3.Internal and press [ENTER] key.

5 Select 7.File Mark Display and press [ENTER] key.

The Card Mark Display menu will appear.

6 Select the number of the file to be displayed and press [ENTER]key.

Confirmation Window will appear.

7 Select 1.Yes and press [ENTER] key.

The selected navigation data is displayed.

8 Press [ MENU] key.

Menu will be closed.

Questions and Answers:

Need help?

Do you have a question about the JRC JMA-610 Series and is the answer not in the manual?

JRC JMA-610 Series Specifications

General