JRC NCR-333 - Display indicators

e Display indicators
~I ai2) Station selection mode
V Ill NAVAREA No.
G : "AUTO MODE" is selected for coast station
selection.
all) : "MANUAL MODE• is selected for coast station
selection.
SORT
Displays the sorting order of the message list.
Refer to ''6.2.7.2 Message list 1".
The NAVAREA number is displayed with
position data input.
Displaytitle ---------------,
The ti11e of the current screen
@Save message ---------...,
This message has been saved.
B Unread message
Unread message is stored.
-./Check mark -----------,
Refer to "6.2.7.2 Message list 1".
A I 9Arrow mark -------...,
'.A.' ·,..·marks are displayed on the top/ bottom
line when the display screen is able to scroll
upward/downward.
Status bar
Displays alarm, received message
type and other status
0113~ Receiving message
The channel number is displayed while receiving message on the channel.
0: 518kHz €II: 490kHz ~: 4209.5kHz
m!i1 BAM alert/ NAVTE alann
m is displayed while BAM alert I NAVTEX alarm has occurred. Refer
to "6.3.5.2 Failure alert(BAM ALERT or NAVTEX ALARM)".
-SAR message
When a search and rescue (SAR) message is received
with the buzzer sound.
eiD Alann message
When an alarm message (MSG TYP: A,B,L) is received
with the buzzer sound.
B Unread message
Unread messages exist.
0 GPS position data
3-4
"~" is displayed while external GPS position data has input.
If E,M,N, or Sis displayed next to"~·. it indicates that
the external GPS position information is invalid.