I 6.3.3.6 POSITION/TIME screen settings (POS/TIME DISP
.SED
"POSfTIME DISP.SET" can
set
up the item displayed on the POSITIONfTIME screen.
POSITIONfTIME screen can be displayed selecting items
of
"position
(POSt.
"time (TIME)", and
•navigational information (NAV)".
[
'''''''''''''
'
''
'
''
''
'
''
'
''''
'
''
'
''
!
6.POS/TIME
DISP.SET(l)
:POS
(2)
:
TIME/NAV
' '
''
'
''
'
''''
'
''
'
''
'
''
'
''
'
''''
'
''
' '
lilillllillllii...,.......,iilliill...,....,il&w.rJ•
and press the
lEN]
key.
Cursor moves
to
the right side
of":".
2.
Press
the~~
key
and select the "POS", "TIME•
or
"OFF", and then press the
lEN]
key.
This item is
displayed on the upside
of
the POSITIONfTIME screen.
[Notes
l
The setup time difference is displayed on the POSITIONfTIME screen.
When you have selected "OFF•, cursor ends the setup
of
this item, without moving to the lower line "(2)"
and pressing
the
IDISPI
key does not display the POSITIONfTIME screen.
3.
The
cursor moves
to
the lower line "(2)". Press
the~~
key, and then press the IENlj
key.
This item is displayed on the downside
of
the POSITIONfTIME screen.
(1
):
POS, The selectable items
of
"(2r
are
as
follows.
OFF,
TIME, TIME/NAV
(1
):
TIME, The selectable items
of
"(2r
are
as
follows.
OFF,
POS, POSfTIME
-When
"OFF" is selected, only the item
of
(1) is displayed on POSITION/TIME screen.
-When
•riME"
(or "POS") is selected, this item
is
displayed
on
the downside of the POSITIONfTIME
screen.
- When
"TIME/NAV" (or
"POS/NA~)
is selected, time is displayed on the left side, and navigational
information is displayed on the right side
of
the POSITIONfTIME screen.
Ex) The following figure is an example when selecting
•pos·
and "TIME/NAV".
(1): POS
(2): TIMEINAV
I The item
of
( 1 ) I
I
The item
of
(2) I
6-42
To Next Page
Loading...
Need help?
General
