FX-1/FX-1R Maintenance Manual
12-4-5-3. Loading the Backup Data to the Hard Disk Drive (Restoring the backup data)
Select [File] and [Control Date Management...] to restore the control data in the SSD. (For the
detailed procedure of restoration, see Section 12-3, "Control Data Management" in the "Instruction
Manual.")
12-35
After restoring the backup data, check the machine settings and adjust it if
necessary.
If there is no backup data for the MS parameters, obtain the MS parameters
again.
Rev. 2.00
To Next Page
Loading...
