JUKI FX-1R - Sticking the Label; Mounting the Board

FX-1/FX-1R Maintenance Manual
3-3-3. Sticking the Label
After the label sticking surface has been degreased, stick the label.

Figure 3-3-3 Left: label/right: label stuck
3-3-4. Mounting the Board
To mount the height sensor board 2 assembly, insert the connector into the head main board
completely and press the head main PWB cover from the top to secure it.

HMS board 2
assembly
Head main board
assembly
Figure 3-3-4 Mounting the Board
3-6
Rev. 2.00