Juniper ACX5048 - Page 118

Figure 39: DC Power Supply Faceplate for a ACX5000 Router
g0008 2 9
67
8
5
3
2
1
4
5—1— ESD grounding pointShunt negative input terminals (+RTN)
6—2— Fault LEDShunt positive input terminals (–48V)
7—3— Output LEDTerminal block
8—4— Input LEDEjector lever
CAUTION: The V+ terminals are shunted internally together, as are the V– terminals.
The same polarity terminal can be wired together from the same source to provide
an additional current path in a higher power chassis. Do not connect the terminals
to different sources.
118