Hangup
Jul 30 21:20:23 init: event-processing (PID 1030) exited with status=0 Normal
Exit
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 3 0 0 0 done
syncing disks... All buffers synced.
Uptime: 10h20m10s
recorded reboot as normal shutdown
unloading fpga driver
Shutting down ACPI
Rebooting...
Stopping crond: [ OK ]
Running guests on default URI: no running guests.
Stopping libvirtd daemon: [ OK ]
Shutting down ntpd: [ OK ]
Shutting down system logger: [ OK ]
Shutting down sntpc: [ OK ]
Stopping sshd: [ OK ]
Stopping vehostd: [ OK ]
Stopping watchdog: [ OK ]
Stopping xinetd: [ OK ]
Sending all processes the TERM signal... [ OK ]
Sending all processes the KILL signal... [ OK ]
Saving random seed: [ OK ]
Syncing hardware clock to system time [ OK ]
Unmounting file systems: [ OK ]
init: Re-executiRE-FPGA-DRV: reboot notifier called with 0x0003
ng /sbin/init
tmc-fpga: TMC FPGA driver shutdown called.
Halting system...
Power down.
CAUTION: The final output of any version of the request system halt command
is the “The operating system has halted.” Wait at least 60 seconds after first seeing
this message before following the instructions in Step 4 and Step 5 to power off
the router.
142
To Next Page
Loading...
