Figure 29: Unpacking an EX4200 Switch
Related
Documentation
Mounting an EX4200 Switch on page 128•
• Installing and Connecting an EX4200 Switch on page 127
• Connecting and Configuring an EX Series Switch (CLI Procedure) on page 165
• Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 168
Parts Inventory (Packing List) for an EX4200 Switch
The EX4200 switches are shipped in a cardboard carton, secured with foam packing
material. The carton contains an accessory box.
The switch shipment includes a packing list. Check the parts you receive in the switch
shipping carton against the items on the packing list. The parts shipped depend on the
configuration you order.
If any part on the packing list is missing, contact your customer service representative or
contact Juniper customer care from within the U.S. or Canada by telephone at
1-888-314-5822. For international-dial or direct-dial options in countries without toll-free
numbers, see http://www.juniper.net/support/requesting-support.html .
Table 58 on page 123 lists the parts and their quantities in the packing list.
Copyright © 2017, Juniper Networks, Inc.122
EX4200 Switch Hardware Guide
To Next Page
Loading...
Need help?
General