10 Original User Manual | Xion Pedelec
tance by one level. This works both ways, depending
on which arrow button you press.
10. You can also use the arrow button to set the assistance
om the motor to zero and begin energy recovery
➠
Chapter 8.1.1 “Energy recovery (recuperation)”.
11. You can now ride o just as you would if you were
riding a normal bike. The motor starts providing assis-
tance as soon as you begin to pedal.
From the rst moment on, you have ll assistance.
This is unfamiliar but comfortable. Practice starting
up in a safe location before venturing into the road
trac.
5 Battery
Your battery is a lithium-ion battery, the ideal type of bat-
tery for this application. One of the main benets of this
battery is its low weight combined with a high capacity.
5.1 Charging the battery
You can charge the battery whilst it is on the Pedelec
➠
Chapter 4 “Quick start”.
Alternatively, you can take the battery out of its holder
and charge it in a separate location.
This is recommended if it is cold outside, in order to
charge the battery in a warmer room. The battery can be
charged at temperatures between 0°C and 45°C.
Charging the battery
5.1.1 Removing the battery
1. Insert the key into the lock and turn it anticlockwise.
The battery is now unlocked.
Unlocking the battery
2. a) Down tube battery: Grip the battery with both
hands and li it forwards/upwards out of its holder. In
doing so, hold on tight to the battery to avoid drop-
ping it. Place the battery down on a suitable surface.
This should be dry, even and non-ammable.
Removing the battery
2. b) Seat tube battery: Grip the battery by the handle
and remove it om the Pedelec by tilting it sideways.
In doing so, hold on tight to the battery to prevent it
om falling out.
Removing the battery
3. You should now remove the key and keep it in a safe
place to prevent it om breaking o or being lost.
To Next Page
Loading...
Need help?
General
