EasyManuals Logo

Kalkhoff Pedelec Xion User Manual

Kalkhoff Pedelec Xion
230 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #61 background imageLoading...
Page #61 background image
60 I General User Manual
28 Regular inspections
As the spokes settle, the length of the brake and shiing
cables increases and the bearings will run in during the
rst kilometres on the bike, you will have to have an ini-
tial inspection carried out by your specialist cycle shop
aer the rst 200 kilometres, or aer four to six weeks.
This is also important for the acceptance of claims made
under the terms of the warranty.
Clean your bike aer every ooad ride and check
it for damage.
Have the initial inspection carried out.
Inspect your bike roughly every 300 to 500km, or
every three to six months.
During this inspection, check that all screws, nuts
and quick-release devices are securely fastened.
Clean your bike.
Grease moving parts (apart om brake contact
surfaces) according to instructions.
Have paint damage and rust spots touched up.
Apply corrosion inhibitor to bare metal parts (apart
om brake contact surfaces).
Have inoperative or damaged parts replaced.
28.1 Inspection schedule
28.1.1 Maintenance / checks
Aer the rst 200 kilometres following purchase,
and subsequently at least once a year
Have the following checked:
tyres and wheels.
Have the tightening torques of the following
checked:
handlebar,
pedals,
pedal cranks,
bike saddle,
seatpost and
fastening screws.
Have the following components readjusted:
headset,
gearshi,
brakes,
suspension elements.
aer every ride
Check the following:
spokes,
rims for wear and true running,
tyres for damage and foreign objects,
quick-release devices,
nction of gearshi and suspension,
brakes, hydraulic brakes for leaks,
lighting and
bell.
aer 300 to 500 kilometres
Have the following checked for wear and replaced
if necessary:
bike chain,
sprocket,
sprocket wheel,
rims and
brake pads.
Clean the bike chain, chainring and sprocket
wheel.
Lubricate the chain using a suitable lubricant.
Check that all screw connections are secure.
aer 1000 kilometres
Have the brake hub checked and, if necessary, lu-
bricate the brake sleeve with brake sleeve grease
or replace it.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kalkhoff Pedelec Xion and is the answer not in the manual?

Kalkhoff Pedelec Xion Specifications

General IconGeneral
BrandKalkhoff
ModelPedelec Xion
CategoryBicycle
LanguageEnglish

Related product manuals