Kalkhoff Pedelec Xion User Manual

20 Original User Manual | Pedelec Impulse 2.0
7.4.4.3 Miscellaneous
Choose om the following using the
/ button.
• Factory settings
• Soware
• Back
Conrm your selection by tapping the
button.
Factory settings: The following question appears: “Restore
factory settings?”. Select “Yes” if you wish to reset the
system to its original settings. Select “No” if you wish to
retain all the settings you have made previously. Conrm
your selection by tapping the
button.
Soware: You are taken to the items:
• Version
• Update
• Back
Make a selection using the
/ button, conrm and go to
that item by tapping the
button.
• Version: Here the current soware version of the
motor is displayed.
• Update: Here you can bring the soware up to
date. Your specialist cycle shop will perform a so-
ware update.
7.4.5 Personalize
Choose om the following using the / button.
• Name
• SET-Favourites
• Back
Conrm your selection by tapping the
button.
Name: Under the sub-item “Name”, you can enter a name
or some text with a maximum of 21 characters which will
be displayed when the display is turned on and o. Navi-
gate using the
/ button and select the desired char-
acter. Tap the
button briey then release it. Select the
desired text om the following options:
Wheel circumference: You can set the “wheel circumfer-
ence” to any value between 1540 mm and 2330 mm by
pressing the
/ buttons on the control panel. Tapping
the
button conrms your selection and then takes you
back to the menu sub-item display.
A change to the setting becomes necessary, for ex-
ample, when you have the tyres on your Pedelec
exchanged for some of a dierent size. In order to
continue to display the correct data, the new wheel
circumference must be entered.
Shi Sensor: Choose om the following values using the
/ button.
OFF
50 ms 100 ms 150 ms 200 ms 250 ms 300 ms
Conrm your selection by tapping the button.
The Shi Sensor recognises gear shiing and imper-
ceptibly interrupts the power assist for actions of a
second. This enables you to move more smoothly and
considerably faster through the gears. The higher the
value you set, the longer the assistance is interrupted
for, and the more time there is for shiing gears.
Climb Assist: Choose om the following values using the
/ button.
1 2 3 4 5 6 7
Conrm your selection using the button.
You can inuence the response time of the power sen-
sor with the Climb Assist. The lower the value you set,
the less responsive the system becomes. The higher
the value you set, the more dynamic the system be-
comes, but beware a yo-yo eect.

Kalkhoff Pedelec Xion Specifications

General

Brand	Kalkhoff
Model	Pedelec Xion
Category	Bicycle
Language	English