57 / 84
The rotation of the console holding the hook
Cylinders
9) While holding down the pump start
button, lower the gooseneck release
console / pressure console from the 1
and 2 levers.
Pump start button
Hydraulic control levers
10) When the turning process is com-
pleted and the tip of the hook in front of
the pool is freed from the console, move
forward with the truck and separate the
pool from the gooseneck.
Separating the gooseneck from the pool
After the gooseneck separa-
tion process has been perfor-
med, do not move the
gooseneck pressure cylin-
ders, which carry the goose-
neck assembly on the truck
and keep it in balance, in any
way (control levers 1 and 2
should not be used). Otherwi-
se, the gooseneck assembly
may fall off from the truck,
and serious damage may oc-
cur to the gooseneck or truck.
Hydraulic control levers
To Next Page
