ACQuire:{RESistance|FRESistance} [{<range> | MIN | MAX | DEF},
[{<samp_count> | MIN | MAX | DEF}, [{<samp_time> | MIN | MAX | DEF},]]] (@<channel>)
Configures a single channel for 2-wire or 4-wire resistance DMM digitizing, but they do not initiate the digitizing.
This command redefines the scan list.
RESistance and FRESistance measurements are only supported on DAQM900A, DAQM901A, DAQM902A, and
DAQM908A multiplexer modules.
Parameter Typical return
<range> = {100 Ω | 1 kΩ | 10 kΩ | 100 kΩ | 1 MΩ | 10 MΩ | 100 MΩ | 1GΩ}
MIN: 100 Ω
MAX: 1GΩ
DEF: 1 kΩ
<samp_count>
MIN: 1
MAX: 50,331,648
DEF: 1
<samp_time>
MIN: 20 μs
MAX: 3600 s
DEF: 1 s
(none)
Configures a default resistance measurement on Channel 101:
ACQ:RES DEF,DEF,DEF,(@101)
38
Keysight DAQ970A/DAQ973A Programming Guide
2 SCPI Programming
To Next Page
Loading...
