18 Keysight Infiniium MXR-Series Real-Time Oscilloscopes User's Guide
1 Setting Up
Turning On the Oscilloscope
Press the power switch in the lower left corner of the oscilloscope front panel.
After a short initialization period, the oscilloscope display appears. The
oscilloscope is ready to use.
You can connect and disconnect probes and cables while the oscilloscope is
turned on.
Turning Off the
Oscilloscope
To turn the oscilloscope off, press the power switch at the lower left corner of the
oscilloscope front panel. The oscilloscope will go through a normal Windows
operating system shutdown process.
Figure 4 Turning On the oscilloscope
To Next Page
Loading...
Need help?
General
