59
Keysight Infiniium MXR-Series Real-Time Oscilloscopes
User's Guide
5 Calibrating the Oscilloscope
When to Perform a User Calibration / 60
Equipment Required / 61
Calibration Time / 62
Calibration Procedure / 63
A calibration is simply an oscilloscope self-adjustment. The purpose of a
calibration is performance optimization.
There are two ways to calibrate an Infiniium MXR-Series oscilloscope:
•A user calibration, also known as a self calibration, includes the minimum set of
calibrations and is intended to be run by oscilloscope users. It can include a
time scale calibration.
•A service calibration is performed only by Keysight Service Center technicians.
This chapter describes how to run a user (self) calibration.
To Next Page
Loading...
Need help?
General
