44 Keysight Infiniium MXR-Series Real-Time Oscilloscopes User's Guide
2 Getting Started
Saving and Printing
You can press the [Save Screen] key to capture and save a screen image to the
oscilloscope's hard drive in the C:\Users\Public\Documents\Infiniium\Screen
Images\ folder.
In the graphical user interface, you can:
•Choose File > Save > and use the menu selections to save composite files
(setups and waveforms), setup files, waveform data, screen images, or
measurement data. You can also save waveforms to waveform memoriies.
•Choose File > Copy Screen Image to easily copy and paste a screen image into a
document.
•Choose File > Print... to send screen images and setup data to a specified printer.
Note that you can customize the [Multi Purpose] key to perform a QuickPrint.
Using the Touch Screen
1 To enable the touch screen so it responds to multi-touch gestures, similar to
those used on tablets and smart phones, press [Touch] or choose Utilities > User
Preferences... and select the Enable Touch Screen check box.
2 Touch the drag waveform icon to highlight it.
Now you can use gestures to flick items horizontally, drag a waveform vertically,
drag horizontally to change the horizontal delay, pinch horizontally to adjust
time/div and delay settings, pinch vertically to adjust a waveform's V/div and
offset settings, or tap to select waveforms and other selections on the display.
To Next Page
Loading...
Need help?
General
