6 Keysight Infiniium MXR-Series Real-Time Oscilloscopes User's Guide
In This Guide
This guide provides the information you need to begin using the Infiniium
MXR-Series real-time oscilloscopes.
Chapter 1, “Setting Up,” starting on page 11, includes unpacking steps, power
and air flow requirements, and other setup information.
Chapter 2, “Getting Started,” starting on page 21, familiarizes you with the inputs
and outputs, front-panel knobs and keys, the graphical user interface, and
describes how to perform basic operations with the oscilloscope.
Chapter 3, “Demos and Online Help,” starting on page 49, describes the Infiniium
oscilloscope application's online demos and online help contents. The online help
describes in detail how to use the Infiniium oscilloscope.
Chapter 4, “Other Oscilloscope Tasks,” starting on page 53, describes the Infiniium
oscilloscope application's online help contents and online demos. The online help
describes how to use the Infiniium oscilloscope application in detail.
Chapter 5, “Calibrating the Oscilloscope,” starting on page 59, describes how to
perform a user calibration.
Chapter 6, “Testing Performance,” starting on page 65, describes the procedures
used to verify that the oscilloscope is operating within specification.
Chapter 7, “Troubleshooting,” starting on page 107, describes what to do if you
encounter any problems with your MXR-Series oscilloscope.
For More Information
• For detailed information on how to use the oscilloscope, see the Infiniium
oscilloscope application's online help. See "Accessing the Online Help" on
page 51.
• For information on controlling the oscilloscope from a remote computer, see
the Oscilloscopes Programmer's Guide found in the Infiniium oscilloscope
application's online help.
For technical assistance, contact your local Keysight Technologies representative
at http://www.keysight.com/find/contactus.
To Next Page
Loading...
Need help?
General
