8 Keysight Infiniium MXR-Series Real-Time Oscilloscopes User's Guide
Connecting Oscilloscope Probes / 30
Maximum input voltage at analog inputs / 30
Verifying Basic Oscilloscope Operation / 31
Default Setup and Autoscale / 32
Using Default Setup / 32
Using Autoscale / 32
Starting and Stopping Waveform Acquisitions / 33
Clearing the Waveform Display / 33
Adjusting the Horizontal Settings / 35
Adjusting the Horizontal Scale / 35
Adjusting the horizontal trigger position (delay) / 36
Magnifying a part of the waveform using Zoom / 36
Using the Navigate Controls / 37
Setting the scale, position, and timebase reference point / 37
Adjusting the Vertical Settings / 39
Turning an analog channel on or off / 40
Adjusting an analog channel's vertical scale and offset / 40
Trigger Level and Other Controls / 41
Entry Knob / 41
[Multi Purpose] Key / 41
Setting Up Triggers / 42
Waveform Generator / 43
Saving and Printing / 44
Using the Touch Screen / 44
Using Markers / 45
Making Measurements / 46
Using Quick Measurements / 47
Using Digital Channels and Protocol Decode / 48
Controlling Digital Channels / 48
Decoding Serial Protocol Data / 48
3 Demos and Online Help
Using the Demo Wizard / 50
Accessing the Online Help / 51
To Next Page
Loading...
Need help?
General
