109
Key Reference
Display
Display
Press Shift > Disp to control detector and display functions.
Graticule Press this softkey to turn on the graticule display for the
trace.
Key access: Shift > Disp
Y Scale Press this softkey to turn on the amplitude scale unit
display on the left of the graticule. The unit is determined
by the Y Axis Unit softkey.
Key access: Shift > Disp
Display Line Activates an adjustable horizontal line that is used as a
visual reference line.
The display line, used for trace arithmetic, has amplitude
values that correspond to its vertical position when
compared to the reference level. The value of the display line
appears in both the active function block and on the softkey.
The arrow keys, knob, or numeric keypad may be used to
adjust the display line. Pressing any digit, 0 through 9, on
the numeric keypad brings up the selected terminator menu.
To deactivate the limit line, press Display Line (Off)
To Next Page
Loading...
