31
Functions and Measurements
Making a Basic Measurement
Presetting the Spectrum Analyzer
Preset function provides a known instrument status for
making measurements. There are two types of presets,
factory and user:
Factory Preset When this preset type is selected, it restores the analyzer to
its factory- defined state. A set of known instrument
parameter settings defined by the factory.
User Preset Restores the analyzer to a user- defined state. A set of user
defined instrument parameter settings saved for assisting the
user in quickly returning to known a instrument
measurement setup.
Press System > Pwr on/Off Preset > Preset Type to select the
preset type.
When Preset Type is set to Factory, pressing Preset triggers a
factory preset condition. The instrument will immediately
return to the factory default instrument parameter setting.
When Preset Type is set to User, pressing Preset triggers a user
preset condition. The instrument will immediately return to
the user defined instrument parameter setting.
When Preset Type is set to Last, pressing Preset triggers a last
power- off condition. The instrument will immediately return
to the parameter setting when it is power off last time.
Setting up a User Preset
To quickly return to instrument settings that are user
defined, perform the following steps to save the instrument
state as the user- defined preset:
1 Set the instrument parameters to the values and settings
necessary for the user preset state. This would include the
frequency, span, amplitude, BW, and measurement type and
any other setup details desired.
To Next Page
Loading...
