Key Reference
MODE
136
Preset Sets the power meter softkey menu options to the preset
conditions. For example, the upper and lower limits are set
to their preset limit values.
Key access: Mode > Power Meter
Spectrum Monitor
Press Mode > Spectrum Monitor to access the submenu listed
as below:
Spectrogram
Run/Pause
Toggles the spectrogram monitoring between Run and Pause.
Key access: MODE > Spectrum Monitor
Restart Meas Resets the spectrogram display.
Key access: MODE > Spectrum Monitor
Update Interval Enables you to set the interval of time to update data to 1
or more seconds. Or, you may set it to automatically
determine the Update Interval that provides the maximum
data collection speed.
A data sample is taken every time interval for display on the
spectrogram. Increasing the update time allows data
capturing over a longer period of time in the spectrogram.
Key access: MODE > Spectrum Monitor
Next View the next points of the chart.
Pause/
Continue
Continues or pauses the current measurement.
When the measurement is in process, this softkey
is displayed as “Pause”; when the measurement is
paused, the softkey is displayed as “Continue”.
Key access: Mode > Power Meter > Meas Setup
To Next Page
Loading...
