Key Reference
Meas
120
Disp Mode This softkey toggles the display mode bwteen chart and
Meter.
Key access: Meas
> Channel Power
Disp Mode This softkey is only avaiable when the display mode is set to
Meter. Pressing Auto Range toggles the display mode bwteen
On and Off. When Auto Range is set to off (manual), press Top
and Bottom to set the display range of the channel power
meter.
Key access: Meas
> Channel Power
RRC Filter This softkey is a combined key to set the Root- Raised Cosine
filter state and the filter Alpha value. When the filter is set
to On, there will be an annotation “RRC ON” on the display.
Key access: Meas
> Channel Power
Filter BW Press this softkey to set the filter bandwidth of the RRC
filter. The default value is 2 MHz.
Key access: Meas
> Channel Power
To Next Page
Loading...
