Key Reference
Sweep
158
Swp Time Rule The analyzer provides two sweep time rules to meet the
different sweep time requirements:
•Speed
Activates the default fast sweep time rule.
• Accuracy
Activates the normal sweep time rule to ensure the
measurement accuracy.
Speed sweep time rule provides a fast measurement function
that decreases the sweep time. Using Fast Sweep will
decrease the measurement accuracy.
Key access: Sweep > Sweep Setup
Sweep Type
Swept FFT
This softkey toggles the Sweep Type between swept mode
and FFT mode. This FFT mode is only available when RBW
is set to 1 kHz, 3 kHz, or 10 kHz.
Key access: Sweep > Sweep Setup
To Next Page
Loading...
