161
Key Reference
Limit
Frequency
Edits the frequency value for a limit point.
After editing, the limit table will place the
frequency or time in correct order. For a
new point, the Amplitude default is 0 dBm,
and Connected default is Yes.
Key access: Shift > Limit > Limit 1/2 > Edit
Amplitude
Sets the amplitude value for the current
point.
Key access: Shift > Limit > Limit 1/2 > Edit
Connected To Previous Pt
Yes No
Defines if the current point being edited is
to be connected to the previous point.
Pressing this key toggles the Connected value
between Yes and No.
Key access: Shift > Limit > Limit 1/2 > Edit
Delete Point
Deletes the current point in the limit line.
Pressing this key will delete the point
immediately.
Key access: Shift > Limit > Limit 1/2 > Edit
Delete Limit Deletes the current limit set. Pressing this
key will delete the limit line entirely.
Key access: Shift > Limit > Limit 1/2
Delete
All Limits
Purges data from the limit- line tables. Pressing this key
will delete all the limit line data immediately.
Key access: Shift > Limit
To Next Page
Loading...
