67
Functions and Measurements
Channel Scanner
5 Press Scan Start to initiate the channel scan function.
6 Press Logging Start to start recording the scan process
which includes the channel power and related channel
bandwidth value to a CSV file. Press Logging Stop to end
the logging. The CSV file will be saved immediately.
Display
In channel scanner mode, the [Disp] hardkey is used to
adjust the channel scanner display to review the customized
scan result.
Press {Freeze} to pause the display refresh but the scan is
still running.
You can sort the channel by ID or power, in ascending or
decending order. Or you can press {Disp Mode} to toggle the
display mode between bar mode and time mode.
Figure 3-23 Time display mode in List N channel scanner
NOTE
Please make sure the file catalog is set to INT or USB unless the logging
file can not be saved successfully. When the logging file exceeds the
maximum volume of the storage catalog, the logging will automatically
pause and the file will be saved immediately.
To Next Page
Loading...
