Keysight N774xC Series Multiport Power Meter
Programming Guide
3 Instrument Setup and
Status
IEEE-Common Commands / 28
Status Reporting – The STATus Subsystem / 34
Interface/Instrument Behaviour Settings – The SYSTem Subsystem / 42
System Communicate - The :SYST:COMMunicate sub tree / 46
This chapter gives descriptions of commands that you can use when
setting up your instrument. The commands are split into the following
separate subsytems:
• IEEE specific commands that were introduced in Common Commands on
page 15.
• STATus subsystem commands that relate to the status model.
• SYSTem subsystem commands that control the serial interface and
internal data.
To Next Page
Loading...
Need help?
General
