Keysight N774 C Series

42 Keysight N774xC Series Multiport Power Meter Programming Guide
3 Instrument Setup and Status
Interface/Instrument Behaviour Settings – The SYSTem Subsystem
The SYSTem subsystem lets you control the instrument’s serial interface.
You can also control some internal data (like date, time, and so on)
Command: :SYSTem:DATE
Syntax: :SYSTem:DATE<wsp><year>,<month>,<day>
Description: Sets the instrument’s internal date.
Parameters: The date in the format year, month, day
Response: none
Example: :syst:date 2019, 10, 12
Command: :SYSTem:DATE?
Syntax: :SYSTem:DATE?
Description: Returns the instrument’s internal date.
Parameters: none
Response: The date in the format year, month, day
Example: :syst:date? -> +2019,+10,+12
Command: :SYSTem:HELP:HEADers?
Syntax: :SYSTem:HELP:HEADers?
Description: Returns a list of commands.
Parameters: none
Response: Returns a list of commands
Example: :syst:help:head? -> Returns a list of all commands