Keysight N774 C Series

Keysight N774xC Series Multiport Power Meter Programming Guide 57
Instrument Setup and Status 3
Parameters: None
Response: String
Example: :syst:comm:eth:rest
Command: :SYSTem:COMMunicate:ETHernet:SAVE
Syntax: :SYSTem:COMMunicate:ETHernet:SAVE
Description: Save the system’s network interface parameters.
Parameters: None
Response: None
Example: :syst:comm:eth:save
Command: :SYSTem:COMMunicate:ETHernet:SMASk?
Syntax: :SYSTem:COMMunicate:ETHernet:SMASk?
Description: Get the subnet mask.
Parameters: None
Response: String
Example: :syst:comm:eth:smas? -> “255.255.255.0”
Command: :SYSTem:COMMunicate:ETHernet:SMASk
Syntax: :SYSTem:COMMunicate:ETHernet:SMASk
Description: Set the subnet mask.
Parameters: String (Up to four groups of up to 3 digits, groups separated
by ".". Groups with leading zeroes are interpreted as octal
numbers.)
Response: None
Example: :syst:comm:eth:smas “255.255.255.0“>