Keysight N774 C Series

Keysight N774xC Series Multiport Power Meter Programming Guide 89
Measurement Operations & Settings 4
Response: None
Example: :sens1:pow:wav 1550nm
:sens:pow:wav:all 1550nm
Affects All power meters
Command: :SENSe[n]:POWer:WAVelength?
Syntax: :SENSe[n]:POWer:WAVelength?[<wsp>MIN|MAX|DEF]
Description: Gets the current sensor wavelength.
Parameters: None
Response: The wavelength as a float value in meters. Also allowed are:
MIN: minimum programmable value
MAX: maximum programmable value
DEF: the preset (*RST) default value
Example: :sens1:pow:wav? → +1.55000000E-006
Affects All power meters