Keysight N774 C Series

86 Keysight N774xC Series Multiport Power Meter Programming Guide
4 Measurement Operations & Settings
Response: None
Example: :sens1:pow:ref:disp
Affects All power meters
Command: :SENSe[n]:POWer:REFerence:STATe
Syntax: :SENSe[n]:POWer:REFerence:STATe<wsp><boolean>
Description: Sets the measurement units to relative or absolute units.
Parameters: A boolean value: 0 or OFF: absolute
1 or ON: relative
Response: None
Example: :sens1:pow:ref:stat 1
Affects All power meters
Command: :SENSe[n]:POWer:REFerence:STATe?
Syntax: :SENSe[n]:POWer:REFerence:STATe?
Parameters: None
Response: A boolean value: 0: absolute
1: relative
Example: :sens1:pow:ref:stat? → 1
Affects All power meters
Command: :SENSe[n]:POWer:REFerence:STATe:RATio
Syntax: :SENSe[n]:POWer:REFerence:STATe:RATio<wsp><slot number>|255|TOREF,<channel number>
Description: Selects the reference for the channel.
Parameters: Slot number:
255 or TOREF:
Channel number:
an integer value representing the channel number you want to reference
results are displayed relative to an absolute reference
an integer value representing the channel number you want to reference