Keysight N774 C Series

Keysight N774xC Series Multiport Power Meter Programming Guide 49
Instrument Setup and Status 3
Command: :SYSTem:COMMunicate:ETHernet:DOMainname?
Syntax: :SYSTem:COMMunicate:ETHernet:DOMainname?
Description: Get the domain name.
Parameters: None
Response: String
Example: :syst:comm:eth:dom? -> “.companyname.com”
Command: :SYSTem:COMMunicate:ETHernet:DOMainname
Syntax: :SYSTem:COMMunicate:ETHernet:DOMainname
Description: Set the domain name (used if DHCP is disabled).
Parameters: String
Response: None
Example: :syst:comm:eth:dom “.companyname.com”
Command: :SYSTem:COMMunicate:ETHernet:DOMainname:CURRent?
Syntax: :SYSTem:COMMunicate:ETHernet:DOMainname:CURRent?
Description: Get the currently used domain name.
Parameters: None
Response: String
Example: :syst:comm:eth:dom:curr? -> “.companyame.com”
Command: :SYSTem:COMMunicate:ETHernet:HOSTname
Syntax: :SYSTem:COMMunicate:ETHernet:HOSTname
Description: Set the host name.