Keysight N774 C Series

Keysight N774xC Series Multiport Power Meter Programming Guide 53
Instrument Setup and Status 3
Command: :SYSTem:COMMunicate:ETHernet:NTP:ENABle?
Syntax: :SYSTem:COMMunicate:ETHernet:NTP:ENABle?
Description: Returns the usage of a NTP Server
Parameters: None
Response: Boolean (0 | 1)
Example: :syst:comm:eth:ntp:enab? -> 1
Command: :SYSTem:COMMunicate:ETHernet:NTP:ENABle
Syntax: :SYSTem:COMMunicate:ETHernet:NTP:ENABle
Description: Disables or enables instrument's use of NTP.
The acronym NTP stands for Network Time Protocol, a protocol for clock synchronization between computer systems.
Parameters: Boolean (0 | 1)
Response: None
Example: :syst:comm:eth:ntp:enab 1
Command: :SYSTem:COMMunicate:ETHernet:NTP:SERVer?
Syntax: :SYSTem:COMMunicate:ETHernet:NTP:SERVer?
Description: Get the defined Network Time Protocol (NTP) server for clock synchronization.
Parameters: None
Response: Address String
Example: :syst:comm:eth:ntp:serv? -> "pool.ntp.org"
Command: :SYSTem:COMMunicate:ETHernet:NTP:SERVer
Syntax: :SYSTem:COMMunicate:ETHernet:NTP:SERVer
Description: Get the defined Network Time Protocol (NTP) server for clock synchronization.