Keysight N774 C Series

Keysight N774xC Series Multiport Power Meter Programming Guide 61
Measurement Operations & Settings 4
Response: None
Example: :conf:meas:sett:pres
Affects: All instruments
Command: :CONFigure:MEASurement:SETTing:CANCel
Syntax: :CONFigure:MEASurement:SETTing:CANCel
Description: Discard all the changes to the setting since the last save or recall
Parameters: None
Response: None
Example: :conf:meas:sett:canc
Affects: All instruments
Command: :CONFigure:MEASurement:SETTing:RECall
Syntax: :CONFigure:MEASurement:SETTing:RECall
Description: Recall a setting from FLASH memory
Parameters: Integer
Response: None
Example: :conf:meas:sett:rec 1
Affects: All instruments
Command: :CONFigure:MEASurement:SETTing:SAVE
Syntax: :CONFigure:MEASurement:SETTing:SAVE
Description: Recall a setting from FLASH memory
Parameters: Integer
Response: None
Example: :conf:meas:sett:save 1
Affects: All instruments