Keysight N774xC Series Multiport Power Meter Programming Guide 67
Measurement Operations & Settings 4
Command: :INITiate[n][:CHANnel[m]]:CONTinuous?
Syntax: :INITiate[n][:CHANnel[m]]:CONTinuous?
Description: Queries whether the software trigger system operates continuously or not.
Parameters: None
Response: A boolean value:
0 or OFF: do not measure continuously
1 or ON: measure continuously
Example: init2:cont? -> 1
Affects: N7744C and N7745C
To Next Page
Loading...
