Features of your vehicle
564
Mirrors
2) Two-Way Communication Dis
-
play Behavior
1. Press and release one of the pro
-
grammed HomeLink buttons (1, 2 or
3)
2. The indicator (4) and (6) operates as
below, if your garage door opener has
Two-Way Communication functional
-
ity.
僅 If the indicator (4) flashes in
Orange, it indicates that the garage
door is "Closing".
僅 The indicator (4) turns solid green
once the garage door has closed.
僅 If the indicator (6) flashes in
Orange, it indicates that the garage
door is "Opening".
僅 The indicator (6) turns solid green
once the garage door has fully
opened.
僅 If the indicator (4) or (6) does not
turn to green, it indicates that the
last status of garage door was not
received properly. The HomeLink
mirror tries to receive the last
known status of the garage door
for a few seconds.
3) Recalling Garage Door Status
HomeLink mirror with Two-Way Com
-
munication provides a way to view the
last stored message from the garage
door opener. In order to recall the last
known status of the last activated
device, press the buttons "1 and 2" OR "2
and 3" simultaneously.
僅 If the indicator (4) appears solid
Green, it indicates that the last acti
-
vated device was "closed" properly.
僅 If the indicator (6) appears solid
Green, it indicates that the last acti
-
vated device was "opened" properly.
3. Erasing HomeLink씾 Buttons
1) Erasing and Reprogramming a
Single HomeLink씾 Button:
1. Press and hold the desired HomeLink
button you want to re-program. DO
NOT release the button.
2. The HomeLink indicator light (7) will
illuminate solid green. Release the
button as soon as the HomeLink indi
-
cator light (7) begins to flash orange,
usually about 20 seconds.
3. Proceed with the steps in the "Pro
-
gramming a New HomeLink Button"
section.
To Next Page
Loading...
Need help?
General
