Features of your vehicle
1164
Automatic climate control system
Temperature control
The temperature will increase to the
maximum (HI) by rotating the knob
clockwise direction.
The temperature will decrease to the
minimum (Lo) by rotating the knob
counter clock wise direction.
When rotating the knob, the tempera
-
ture will increase or decrease by 1 °F (0.5
°C). When set to the lowest temperature
setting, the air conditioning will operate
continuously.
When starting the vehicle in cold
weather using manual temperature con
-
trol, operate the system in the following
method to improve heating.
僅 Turn off or lower the blower, right
after starting the engine.
僅 Allow the engine to warm up during
this time since the air flow from the
heater is still cold.
僅 After a few minutes of engine warm
up, turn on or set the fan to a higher
level and adjust the temperature set
-
ting to hot.
Adjusting the driver and passen
-
ger side temperature equally
1. Press the "SYNC" button to adjust the
driver and passenger side tempera
-
ture equally.
The passenger side temperature will
be set to the same temperature as the
driver side temperature.
2. Turn the driver side temperature con
-
trol knob. The driver and passenger
side temperature will be adjusted
equally.
3. If you rotate the passenger's tempera
-
ture control knob, the "SYNC" button
is off and the passenger side tem
-
perature can be operated individually.
Adjusting the driver and passen
-
ger side temperature individually
Press the "SYNC" button again to adjust
the driver and passenger side tempera
-
ture individually. The button indicator
will turn off.
Changing temperature scale
You can switch the temperature mode
from Centigrade to Fahrenheit as fol
-
lows:
僅 While pressing the OFF button, press
the AUTO button for 3 seconds or
more.
ODL3A040315
ODL3A040316
To Next Page
Loading...
Need help?
General
