41
6
6
Driver assistance system Blind-Spot Collision-Avoidance Assist (BCA)
僅 Ensure that Warning Methods you
have set may apply to the warning
volume of other driver assistance sys
-
tems.
僅 Warning Methods will maintain its last
setting even if the vehicle is restarted.
僅 The setting menu may not be avail
-
able for your vehicle depending on
the vehicle features and specifica
-
tions.
僅 Descriptions of each driver assistance
system may be slightly different from
the owner's manual after updating the
software of your infotainment system.
In this case, scan the QR code in the
infotainment system manual to
access the web manual to review the
changes.
僅 Depending on your update, the menu
may be displayed as 'Warning Sound'
or 'Warning methods'.
Blind-Spot Collision-Avoidance
Assist operation
Warning and control
Vehicle detection
僅 To warn the driver a vehicle is
detected, the warning light on the side
view mirror and head-up display (if
equipped) will appear.
僅 Blind-Spot Collision-Avoidance Assist
will operate when your driving speed
is above 12 mph (20 km/h) and the
speed of the vehicle in the blind spot
area is above 7 mph (10 km/h).
Collision Warning
僅 Collision warning will operate when
the turn signal is turned on in the
direction of the detected vehicle.
僅 If 'Warning Only' is selected from the
Settings menu, the collision warning
will operate when your vehicle
approaches the lane the blind spot
vehicle is detected.
僅 To warn the driver of a collision, the
warning light on the side view mirror
and head-up display (if equipped) will
blink. At the same time, an audible
warning will sound.
ODL3A050190
To Next Page
Loading...
Need help?
General
