Driver assistance system
406
Blind-Spot Collision-Avoidance Assist (BCA)
Warning Timing
With the ENGINE START/STOP button in
the ON position, select 'Driver Assistance
→ Warning Timing' from the Settings
menu to change the initial warning acti
-
vation time for Blind-Spot Collision-
Avoidance Assist.
When the vehicle is first delivered, Warn
-
ing Timing is set to 'Standard'. If you
change the Warning Timing, the warning
time of other Driver Assistance systems
may change.
僅 The setting of the Warning Timing
applies to all functions of Blind-Spot
Collision-Avoidance Assist.
僅 Even though 'Standard' is selected for
Warning Timing, if the vehicles
approaches at high speed, the initial
warning activation time may seem
late.
僅 Select 'Late' for Warning Timing when
traffic is light and when driving speed
is slow.
Warning Methods
You can adjust the Warning Methods
with the ignition switch or ENGINE
START/ STOP button in the ON position.
僅 Warning Volume : Select 'User Set
-
tings → Driver Assistance → Warning
Volume' on the instrument cluster or
'Settings → Vehicle → Driver Assis
-
tance → Warning Methods → Warn
-
ing Volume' on the Infotainment
system.
僅 Driving Safety Priority : Select 'Vehicle
Settings → Driver Assistance → Warn
-
ing Methods → Driving Safety Priority'
on the Infotainment system. For safe
driving, the audio volume will tempo
-
rarily decrease to warn the driver with
the audible warning.
To Next Page
Loading...
Need help?
General
