39
6
6
Driver assistance system Blind-Spot Collision-Avoidance Assist (BCA)
Blind-Spot Collision-Avoidance
Assist settings
Blind-Spot Safety
With the ENGINE START/STOP button in
the ON position, select or deselect
'Driver Assistance → Blind-Spot Safety'
from the Settings menu to set whether
or not to use each function.
僅 If 'Active Assist' is selected, Blind-Spot
Collision-Avoidance Assist will warn
the driver with a warning message, an
audible warning, and braking assist
will be applied depending on the colli
-
sion risk levels.
僅 If 'Warning Only' is selected, Blind-
Spot Collision-Avoidance Assist will
warn the driver with a warning mes
-
sage, and an audible warning
depending on the collision risk levels.
Braking will not be assisted.
僅 If 'Off' is selected, Blind-Spot Collision-
Avoidance Assist will turn off.
When the engine is restarted with Blind-
Spot Collision-Avoidance Assist off, the
'Blind-Spot Safety System is Off' mes
-
sage will appear on the cluster.
If you change the setting from 'Off' to
'Active Assist' or 'Warning Only', the
warning light on the side view mirror will
blink for approximately 3 seconds.
In addition, if the engine is turned on,
when Blind-Spot Collision-Avoidance
Assist is set to 'Active Assist' or 'Warning
Only', the warning light on the side view
mirror will blink for approximately 3 sec
-
onds.
僅 'If 'Warning Only' is selected, braking
is not assisted.
僅 If 'Off' is selected, the driver should
always be aware of the surroundings
and drive safely.
If the engine is restarted, Blind-Spot Col
-
lision-Avoidance Assist will maintain the
last setting.
To Next Page
Loading...
Need help?
General
